The Liaonan metamorphic core complex (MCC) developed a NNE trend, NWW-dipped, low-angle detachment fault. Ductile shear zone occurred in the lower part and mainly consists of mylonitic granitic gneisses, which indicated a top-to-NWW shearing. Finite strain measurement of feldspar strain markers were estimated by the Rf /φ method. It suggested that strain intensities of mylonites (Es) changed from 0.36 to 1.0 with an average of 0.75. Fulin and Hossack diagrams indicated strain types were close to flattening strain (lod parameter υ=0.11-0.98). Kinematic vorticity of mylonitic foliations and stretching lineations were estimated by Mohr diagram method and long and short axis method. The results indicated that kinematic vorticity ranged from 0.74 to 0.96 with an average of 0.85, which suggested that the foliations and lineations of mylonites recorded a bulk simple-dominated general shearing. The Kinematic vorticity during formation of extensional crenulation cleavage estimated by C′ method ranged from 0.10 to 0.84 with 0.58 on average. It recorded a later bulk pure-dominated general shearing. Based on the strain measurement, kinematic vorticity and thickness of the detachment fault, the quantification of thinning for the ductile shearing were calculated, which ranged from 130 to 705 m. All results suggested that the deformation mechanism of the Liaonan MCC was represented by earlier simple-dominated shearing and later pure-dominated shearing.